PLM-Microcamera TCC3
 View Full-Size Image |
|
This mini-camera, in the color version is specifically designed for the realization of hidden cameras. The dimensions are slightly larger than a coin and can be installed in very small objects. The pin-hole lens allows shooting through a hole of only 1 mm. in diameter.
The camera
The PLM TCC3 camera is very small, as you can see from the scale shown on the side. Despite its size "mini" offers a resolution of 380 lines and a brightness of at least 1 lux, which do not regret the larger cameras.
This mini camera does not use economic C-MOS technology, now much used, with low quality results, in the end of the mini cameras cheap, but high-quality CCD (Sharp 1 / 4 "color), ensuring crisp, clear images .
A distinctive feature of this mini camera is the automatic shutter management (auto-shutter), which is controlled by 1 / 50 to 1/100.000 second so optimized for use with mini-objectives, so as to achieve a genuine and their electronic auto-iris. For this reason, although they can not fit real auto iris lenses (only for larger cameras), this mini camera behaves very well be in a position of full sunlight to shade. The pin-hole lens.
The camera is supplied with a special lens called pin-hole for concealment. This lens allows shooting through a hole of a mm. in diameter and is therefore suitable for making hidden cameras are completely invisible even at close range observation. TCC3 PLM The camera is normally equipped with a pin-hole plate 3.6 mm. that allows a wide-angle view, adapted to cover an entire environment of small / medium size.
Alternatively, you can buy the micro cameras and TBC3X TCC3X that are provided with two pin-hole lens conical:
- PLM-036PC Pin-Hole conical angle - close-up
- PLM-062PC Pin-Hole conical focus - remote shooting
The pin-hole is generally flat, as in the top of the big picture, so as to minimize the thickness of the camera.
However, if the masking surface is uneven and not smooth, it may be convenient to purchase the cone (at right) that allows you to more easily approach the target in the forum. Wiring and Installation
This camera can be connected directly to a TV or monitor via a cable. E 'provided a supplied cable about 40 cm .. that ends with a connector for video and one for audio (both RCA) plus a plug for power.
The power supply is 12VDC. To get the 12V from the 220V, uses a power supply 220VAC / 12VDC 500 mA as RE-AL4.
If you want to manage multiple cameras you can connect to a controller to a cyclic quad or a multiplexer.
Modern digital video recorders do not require management devices and cameras can be directly connected to their inputs.
It 'also available in a miniature color wireless version, complete with mini-transmitter .- Composition of the product - with pin-hole camera PLM-036P (flat)
- Adjustable mounting bracket
- Connection cable power video + (40 cm.)
The camera
The PLM TCC3 camera is very small, as you can see from the scale shown on the side. Despite its size "mini" offers a resolution of 380 lines and a brightness of at least 1 lux, which do not regret the larger cameras.
This mini camera does not use economic C-MOS technology, now much used, with low quality results, in the end of the mini cameras cheap, but high-quality CCD (Sharp 1 / 4 "color), ensuring crisp, clear images .
A distinctive feature of this mini camera is the automatic shutter management (auto-shutter), which is controlled by 1 / 50 to 1/100.000 second so optimized for use with mini-objectives, so as to achieve a genuine and their electronic auto-iris. For this reason, although they can not fit real auto iris lenses (only for larger cameras), this mini camera behaves very well be in a position of full sunlight to shade. The pin-hole lens.
The camera is supplied with a special lens called pin-hole for concealment. This lens allows shooting through a hole of a mm. in diameter and is therefore suitable for making hidden cameras are completely invisible even at close range observation. TCC3 PLM The camera is normally equipped with a pin-hole plate 3.6 mm. that allows a wide-angle view, adapted to cover an entire environment of small / medium size.
Alternatively, you can buy the micro cameras and TBC3X TCC3X that are provided with two pin-hole lens conical:
- PLM-036PC Pin-Hole conical angle - close-up
- PLM-062PC Pin-Hole conical focus - remote shooting
The pin-hole is generally flat, as in the top of the big picture, so as to minimize the thickness of the camera. However, if the masking surface is uneven and not smooth, it may be convenient to purchase the cone (at right) that allows you to more easily approach the target in the forum. Wiring and Installation
This camera can be connected directly to a TV or monitor via a cable. E 'provided a supplied cable about 40 cm .. that ends with a connector for video and one for audio (both RCA) plus a plug for power.
The power supply is 12VDC. To get the 12V from the 220V, uses a power supply 220VAC / 12VDC 500 mA as RE-AL4.
If you want to manage multiple cameras you can connect to a controller to a cyclic quad or a multiplexer.
Modern digital video recorders do not require management devices and cameras can be directly connected to their inputs.
It 'also available in a miniature color wireless version, complete with mini-transmitter .- Composition of the product - with pin-hole camera PLM-036P (flat)
- Adjustable mounting bracket
- Connection cable power video + (40 cm.)
| SPECIFICATIONS | |
| Image sensor | 1 / 4 "CCD |
| Electronic shutter | 1 / 50, 1 / 60 - 1 / 100, 00sec, Automatic |
| Horizontal resolution | 380 TV LINES |
| Sensitivity | 1.0 LUX |
| Video output | 1 Vp-p, 750hms |
| Operating temperature | -5C ° .. +40 ° C |
