Micro-camera PLM OCCAM001
 View Full-Size Image |
|
This micro camera (450 TV lines, 0.2 Lux, F1.2) Colour can 'be connected via the supplied cable to the micro-DVR5000 VCR PLM, PLM-DVR468, the video transmitter PLM-VIDEOTX or any TV or monitor PLM-OCCAM001 is a camera specially designed for concealment. It can easily be hidden inside any object and also between the clothes worn. Compared to cameras with pin-hole for use genericoconsente many advantages: - High resolution color images of exceptional clarity and detail. Good yield even with low-light shooting. - Separate microphone: High-sensitivity microphone positioned in the best way. - 5 to 12VDC Power: Multiple power options: 12V DC power supply (not included), 9V transistor battery directly from a VCR Pocket microvideoregistratore PLM-DKPV500 - camouflage Objective: The front lens element consists of a mimetic interchangeable (screw or button) for a perfect cover-invisible, even to close examination. The Camera
The camera uses a CCD SONY SuperHad color, high resolution (450 lines). This is a high level sensor with 768x582 pixels, suitable for professional-level shooting. Despite its small size pin-hole lens, the camera can shoot in lighting conditions are precarious due to the excellent electronic shutter and high signal to noise ratio (up to 60dB).
The camera measures only 26x22 mm, is very light and the cable outlet is arranged downward so as to minimize the thickness occupied. The microphone for audio with high sensitivity
The mini camera is equipped with ultra-sensitive microphone separately. This lets you place the microphone in a more advantageous position than the position of the camera. The microphone was specifically designed to allow the perception of the audio in an average room size, even if kept under clothing or even inside a drawer or a subject. The objective
The camera lens is of the pin-hole 4.3 mm in an excellent position to offer wide-angle view through a hole of only 1 mm. in diameter. The design objective, unique, allows you to screw in the front mimetizzante an element selected from the following:
Button front jacket
Button jacket sleeve
Button shirt
Phillips head screw
Allen screw for every type of masking is provided a set of 5 same items so you can for example replace all the buttons on a jacket and make the recovery by one of them.
These accessories allow you to hide hiding in a perfect way the camera is fixed in place in clothing and have the great advantage of keeping the camera always in the correct shooting position.
Is always possible to use the lens without a mask, putting it behind a hole just crafted. Nutrition
Another interesting feature of these cameras is the diversity in supply options. The camera accepts voltage from 5 to 12VDC. E 'can be provided through a power 220VAC12VDC (not supplied) or via a 9V transistor battery that allows several hours of battery life and is ideal for portable applications (plastic container provided with a switch to 9V external ON / OFF).
The camera cable ends with a space-saving minijack, but comes with an adapter socket for power and audio / video RCA.
If you use a VCR as a pocket-PLM microvideoregistratore DKPV500 you can put the jack of the camera directly into the VCR, which will supply the camera via its internal battery. Product Composition
- Pin-hole camera lens and microphone
- Kit of 5 camouflage accessories button front jacket
- Kit of 5 camouflage accessories button jacket sleeve
- Kit of 5 camouflage accessories button shirt
- Kit of 5 camouflage accessories cross-head screw
- Kit of 5 camouflage accessories Allen screw
- Housing for 9V Switched
- Wire DC power adapter + Video / Audio RCA
OPTIONAL: - Rechargeable battery pack (? 90.00 including VAT)
Rechargeable battery pack Lithium Ion battery that allows you to feed the micro cameras or video transmitters to 12V during the moving and / or short-term ones that do not require a fixed installation. - Switching 220 VAC / 12 VDC 1A stabilized (? 15.00 vat included)
To power all cameras from one network to 12VDC 220VAC
The camera uses a CCD SONY SuperHad color, high resolution (450 lines). This is a high level sensor with 768x582 pixels, suitable for professional-level shooting. Despite its small size pin-hole lens, the camera can shoot in lighting conditions are precarious due to the excellent electronic shutter and high signal to noise ratio (up to 60dB).
The camera measures only 26x22 mm, is very light and the cable outlet is arranged downward so as to minimize the thickness occupied. The microphone for audio with high sensitivity
The mini camera is equipped with ultra-sensitive microphone separately. This lets you place the microphone in a more advantageous position than the position of the camera. The microphone was specifically designed to allow the perception of the audio in an average room size, even if kept under clothing or even inside a drawer or a subject. The objective
The camera lens is of the pin-hole 4.3 mm in an excellent position to offer wide-angle view through a hole of only 1 mm. in diameter. The design objective, unique, allows you to screw in the front mimetizzante an element selected from the following:
Button front jacket
Button jacket sleeve
Button shirt
Phillips head screw
Allen screw for every type of masking is provided a set of 5 same items so you can for example replace all the buttons on a jacket and make the recovery by one of them.
These accessories allow you to hide hiding in a perfect way the camera is fixed in place in clothing and have the great advantage of keeping the camera always in the correct shooting position.
Is always possible to use the lens without a mask, putting it behind a hole just crafted. Nutrition
Another interesting feature of these cameras is the diversity in supply options. The camera accepts voltage from 5 to 12VDC. E 'can be provided through a power 220VAC12VDC (not supplied) or via a 9V transistor battery that allows several hours of battery life and is ideal for portable applications (plastic container provided with a switch to 9V external ON / OFF).
The camera cable ends with a space-saving minijack, but comes with an adapter socket for power and audio / video RCA.
If you use a VCR as a pocket-PLM microvideoregistratore DKPV500 you can put the jack of the camera directly into the VCR, which will supply the camera via its internal battery. Product Composition
- Pin-hole camera lens and microphone
- Kit of 5 camouflage accessories button front jacket
- Kit of 5 camouflage accessories button jacket sleeve
- Kit of 5 camouflage accessories button shirt
- Kit of 5 camouflage accessories cross-head screw
- Kit of 5 camouflage accessories Allen screw
- Housing for 9V Switched
- Wire DC power adapter + Video / Audio RCA
| SPECIFICATIONS | |
| Sensor Type CCD | 1 / 4 "Color CCD |
| Number of pixels in the CCD | 512X582 (PAL) |
| Synchronization of the video signal | internal |
| Signal to noise ratio (S / N ratio) | more than 48db |
| Horizontal resolution | 450 TV Lines |
| Minimum lighting required for recovery | 0.2 Lux (F1.2) |
| Automatic Electronic Shutter | 1/50....1/100.000 sec. |
| Gamma Correction | 0,45 |
| Video Output | 1 Vp-p, 75 Composite Video 0hms |
| Operating temperature | -10C +45 C ° ° .. |
| Camera power | 12V DC |
| Maximum Power Consumption | 70mA |
| Dimensions "body" | 29 mm x 29 mm x 7 mm |
Rechargeable battery pack Lithium Ion battery that allows you to feed the micro cameras or video transmitters to 12V during the moving and / or short-term ones that do not require a fixed installation. - Switching 220 VAC / 12 VDC 1A stabilized (? 15.00 vat included)
To power all cameras from one network to 12VDC 220VAC
