Micro Camera PLM Serpentine

This micro-camera to another resolution (470 TVL) color can 'be connected via the supplied cable to the micro-DVR5000 VCR PLM, PLM-DVR468, the video transmitter PLM-VIDEOTX or any TV or monitor to make it easier to oculta the micro-camera, for example in the clothing, the lens (11 mm x 11 mm x 18 mm) is separated from the body (29 mm x 29 mm x 7 mm) of the micro-camera which is connected by a wire to a length of 1m. The micro and 'comes complete with a pin-hole lens that lets you shoot through a hole of a millimeter will result' invisible from the outside. The gain control and white balance automatically makes this camera a real gem in a position to provide good images even in low light. 'On the back of the body of the micro-camera is the cable (about 45 cm) with the plug to connect the RCA cable (60 cm) for video output and the pin of 'supply 12 VDC.

SPECIFICATIONS
Sensor Type CCD	1 / 4 "Color CCD
Number of pixels in the CCD	752x582 (PAL)
Synchronization of the video signal	internal
Signal to noise ratio (S / N ratio)	more than 48db
Horizontal resolution	470 TV LINES
Minimum lighting required for recovery	0.5 Lux (F1.2)
Automatic Electronic Shutter	1/50....1/100.000 sec.
Gamma Correction	0,45
Video Output	1 Vp-p, 75 Composite Video 0hms
Lens	* Focal length 3.7 mm - F-Stop F2, 0
Operating temperature	-10C +45 C ° ° ..
Camera power	12V DC
Maximum Power Consumption	70mA
Lens size	11 mm x 11 mm x 18 mm
Dimensions "body"	29 mm x 29 mm x 7 mm

OPTIONAL: - Rechargeable battery pack (? 90.00 including VAT)
This allows devices to feed the micro cameras or video transmitters to 12V during the moving and / or short-term ones that do not require a fixed installation. - Switching 220VAC / 12VDC 1A stabilized (? 15.00 including VAT)
To power all cameras from one network to 12VDC 220VAC Dimensions:
Width 60 mm x 82 mm depth x 22mm height